Item:LB86401, 8"/64T NO-MELT SAW M-TCG.GRIND
Amana LB86401 Non-Melt Blade
-2º Hook - Modified Triple Chip (MTC) Grind
When cutting acrylics such as Plexiglas, polycarbonates such as Lexan and other plastics, "chip-welding" - a melting of the material - is a concern. But not with the Non-Melt blade. With a modified triple-chip grind and a 2º negative hook angle, the blade produces less heat than a standard blade, leaving a crisp, smooth edge.
Specification
-2º Hook - Modified Triple Chip (MTC) Grind
When cutting acrylics such as Plexiglas, polycarbonates such as Lexan and other plastics, "chip-welding" - a melting of the material - is a concern. But not with the Non-Melt blade. With a modified triple-chip grind and a 2º negative hook angle, the blade produces less heat than a standard blade, leaving a crisp, smooth edge.
Specification
- D - Diameter:8" (200mm)
- Teeth:64
- Grind:MTC
- Tool No.:LB86401
- B - Kerf:.098"
- C - Plate:.070"
- Bore:5/8"
When cutting acrylics such as Plexiglas, polycarbonates such as Lexan and other plastics, "chip-welding" - a melting of the material - is a concern.