Item:G776-24, 24" ALASKAN MKIII MILL 21" WIDTH OF CUT
Granberg G776-24 24" Alaskan MK-III Mill
Description
The Alaskan MK III is a high quality woodworking tool for the builder, wood worker, and outdoor enthusiast. It easily mounts to your saw (ripping chain required). Weight: 17.0 Lbs.
Turn Logs Up To 24" In Diameter Into Lumber
Mill slabs from 1/2" up to 12" thick & 22" wide
Portable system can be easily transported to remote sites where the tree is
Perfect for woodworkers, builders,ranchers, & more
Rails Included
Provides a flat surface for the mill to ride on to get flat, even cuts
Delivers uniform cuts time after time
Works With Your Chain Saw & Ripping Chain
Large displacement saws are recommended for more effective ripping
Smaller saws will work but are less efficient; no bar drilling necessary
Your chain saw bar must be longer than 5"; some small bars are too narrow
Versatile
Best practice is to have a mill the same length as your chain saw bar
Logs 18"- 24" should be cut with 55-65cc chain saws
Clamps onto your chainsaw bar
Description
The Alaskan MK III is a high quality woodworking tool for the builder, wood worker, and outdoor enthusiast. It easily mounts to your saw (ripping chain required). Weight: 17.0 Lbs.
Turn Logs Up To 24" In Diameter Into Lumber
Mill slabs from 1/2" up to 12" thick & 22" wide
Portable system can be easily transported to remote sites where the tree is
Perfect for woodworkers, builders,ranchers, & more
Rails Included
Provides a flat surface for the mill to ride on to get flat, even cuts
Delivers uniform cuts time after time
Works With Your Chain Saw & Ripping Chain
Large displacement saws are recommended for more effective ripping
Smaller saws will work but are less efficient; no bar drilling necessary
Your chain saw bar must be longer than 5"; some small bars are too narrow
Versatile
Best practice is to have a mill the same length as your chain saw bar
Logs 18"- 24" should be cut with 55-65cc chain saws
Clamps onto your chainsaw bar
Granberg G776-24 24" Alaskan MK-III Mill