Item:574432, ***NO LONGER AVAILABLE USE 576423*** FESTOOL 574432 DOMINO JOINER DF 500 Q SET

Festool 574432 Domino DF 500 Mortise and Tenon Joiner Set

The Evolution Of Joinery
Joining has always been a slow, difficult process. Never again, thanks to the Festool Domino joining system. The system consists of the Domino joiner and pre-fabricated, beech and sipo Domino tenons. The Domino joiner, with its revolutionary cutting method, simple indexing features and adjustable mortise sizing, makes flawless mortises every single time. The Domino tenon is equally as impressive - it is 100% rotation-proof and far stronger than either biscuits or dowels. It also has a large gluing surface area for extra strength.

Domino Joiner DF 500 Q Set (including trim stop and cross stop) for fast, easy and strong mortise and tenon joining.

WATCH THE VIDEO

Features & Benefits

• Patented Routing Principle  - The spiral cutter rotates and oscillates to create perfect mortises.
• Mortise Width Adjustment - Adjusting the width of the mortise allows for easier alignment when joining panels.
• Positioning - With an adjustable fence angle, retractable stop flaps, adjustable cutter height with step gauge, and precise mortise depth stop, the Domino joiner enables precise mortise placement and spacing.
• Pivoting Fence - Fence creates angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
• Depth Control - Quick, precise adjustment for five different mortising depths, relative to the size of the tenon required for the application.
• Stepped Height Stop - 7 different step positions for different material thicknesses for fast and easy fence height adjustment.
• Dust Extraction - Your mortises are clean and ready for glue when the Domino is used in combination with a dust extractor. Proper dust extraction greatly extends cutter life.
• Carbide Tip Spiral Bit  - Durable, long-lasting bit withstands 5,000-14,000 joints depending on material.
• Rapid Bit Change - Means you can change a bit in under 30 seconds to match desired tenon size.

Specifications

Item No.	574432
Model No.	DF 500 Set
Cutter Spindle Speed	24,300 RPM
DOMINO Slot Cutter Diameter	5, 6, 8, 10 mm
Miter Routing	0-90°; stop positions at 0°, 22.5°, 45°, 67.5°, 90°
Moveable Stepped Stop	16/20/22/25/28/36/40 mm
Power Consumption	420 watts
Routing Depth Stop	12/15/20/25/28 mm
Routing Height Adjuster with Scale	5 - 30 mm
Weight	7 lbs. (3.2 kg)

Includes

• D5 DOMINO Cutter
• Plug-It Power Cord
• Support Bracket
• Wrench
• Systainer