Item:569, CARBIDE GROUT REMOVAL BIT, 1/1

Dremel 569 1/16" Carbide Grout Removal Bit

Ideal for replacing wall and floor grout or removing grout to replace broken tiles.

• Easily remove both wall and floor grout Use with Advantage Grout Removal Attachment #962-01.
  
• A high-speed cutter with a 1/8" steel shank.
  
• 30 degree angle for controlled cutting.
  
• Guides 180 degrees apart to keep bit centered
  
• Easy screw on mounting.
  
• Excellent cutting visibility.
  
• User Tips
  
• For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
  
• Do not run in excess of 18,000 rpm. Therefore, do not use with a Single-Speed MultiPro Rotary Tool unless you use the #221 Foot Speed Control.
  

• Bit Diameter inch: 1/16 inch
  
• Bit Diameter mm: 1.6 mm
  
• Description: Carbide Grout Removal Bit
  
• Shank Diameter: 1/8 inch 3.2 mm