Item:LB10801, 10"/80T PLASTIC NON MELT M-TCG
Amana LB10801 Non-Melt Blade
-2º Hook - Modified Triple Chip (MTC) Grind
When cutting acrylics such as Plexiglas, polycarbonates such as Lexan and other plastics, "chip-welding" - a melting of the material - is a concern. But not with the Non-Melt blade. With a modified triple-chip grind and a 2º negative hook angle, the blade produces less heat than a standard blade, leaving a crisp, smooth edge.
Specification
-2º Hook - Modified Triple Chip (MTC) Grind
When cutting acrylics such as Plexiglas, polycarbonates such as Lexan and other plastics, "chip-welding" - a melting of the material - is a concern. But not with the Non-Melt blade. With a modified triple-chip grind and a 2º negative hook angle, the blade produces less heat than a standard blade, leaving a crisp, smooth edge.
Specification
- D - Diameter:10" (250mm)
- Teeth:80
- Grind:MTC
- Tool No.:LB10801
- B - Kerf:.100"
- C - Plate:.070"
- Bore:5/8"
When cutting acrylics such as Plexiglas, polycarbonates such as Lexan and other plastics, "chip-welding" - a melting of the material - is a concern.