Item:725004K, JPS-10 10" Proshop 1.75HP 1P
The JET ProShop Table Saw offers features you expect from a high-end cabinet saw, in the compact design of a contactor-style machine. The redesigned transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife and dado insert are included for non-through cuts and dado cuts. The exclusive ProShop fence system is available in 30” or 52” rip capacity. Features
- Newly designed arbor lock to change blades quickly and easily
- Quick release riving knife for hassle free riving knife changes
- Improved dust shroud around blade for greater dust collection
- Convenient, magnetic paddle switch for the safest operation possible
- Innovative single belt design for easier belt tensioning and reduced vibration.
- Motor reset switch conveniently relocated to the power switch, instead of the motor
- Dado insert and low profile riving knife included
- Redesigned guard for better protection and ease of use
- On board storage for all included accessories
- Height: 43.000
- Length: 60.000
- Gross Weight: 261.500
- Net Weight: 235.700
- Volume: 59.722
- Width: 40.000
- Recommended Circuit Size (Amps.): 20
- Motor Voltage (V.): 115
- Table Height from Floor (In.): 34-3/4
- Maximum Depth of Cut at 45 Degrees (In.): 2-1/8
- Motor Power (HP): 1-3/4
- Maximum Width of Dado (In.): 13/16
- Table Size (L x W) (In.): 20 x 27
- Table in Front of Saw Blade at Maximum Depth of Cut (In.): 8.81
- Table Size with Extension (L x W) (In.): 44 x 27
- Motor Amps: 14.8
- Motor Phase (PH): 1
- Arbor Speed (RPM): 4000
- Maximum Rip Left of Blade (In.): 13-1/2
- Maximum Depth of Cut (In.): 3-1/8
- Miter Gauge Type: T-Slot with Stops
- Table Type: Cast Iron
- Arbor Diameter (In.): 5/8
- Dust Collection Minimum CFM Required (CFM): 350
- Maximum Rip Right of Blade (In.): 30
- Prewired Voltage (V.): 115
- Maximum Diameter of Dado (In.): 8
- Blade Diameter (In.): 10
- Style (Type): SV_1375591258817
- Dust Port Outside Diameter (In.): 4
Jet 725004K ProShop II 115V 30" Rip Stamped Steel Wings