My Cart

Your Shopping Cart is Empty

Amana Tool 46286 1/8-In SC 2D/3D Carving Tapered Angle Ball Tip Bit

Amana Tool  46286 1/8-In SC 2D/3D Carving Tapered Angle Ball Tip Bit

More images

  • Amana Tool  46286 1/8-In SC 2D/3D Carving Tapered Angle Ball Tip Bit
Sale Price: $62.00
Compared at: $62.00
You Save: $0.00
Product ID : 14246286
Free Shipping - Lower 48 Only
Manufacturer: Amana Tool



Amana Tool  46286 1/8-In SC 2D/3D Carving Tapered Angle Ball Tip Bit

Solid Carbide 2D and 3D Carving Tapered Ball Nose (Conical Ball) Zirconium Nitride (ZrN) Coated Router Bit
Ensure your foam projects are milled with accuracy and detail. Solid carbide industrial quality router bits provide deep cuts in thick materials in fewer passes, providing less assembly and increasing productivity.  Specifically designed for milling polyurethane foam, expanded polystyrene (EPS), polyethylene foam,  extruded polystyrene foam (XPS).

  • Precision 2D and 3D large scale carving
  • Dimensional signage
  • 3D millwork
  • 2D and 3D contouring, profiling, modeling and pattern making for cabinetry, sign making, furniture making and jewelry mold making
  • Compatible with CarveWright™  and CompuCarve woodworking systems
  • Perfect for model-makers on large 3D  milling profiles in abrasive EPS foam and other materials 
Excellent for Cutting
  • Acrylic
  • Aluminum, Brass, Bronze, Copper, Gold, Silver & Titanium
  • Composite
  • Dibond®
  • Expanded Polystyrene Foam (EPS)
  • Extruded Polystyrene Foam (XPS)
  • Fiberglass
  • Fiberglass PCB Board
  • Foam Board
  • Graphite
  • HDPE
  • HDU
  • 20# High Density Urethan
  • Phenolics
  • Phenolic Composites
  • Polyethylene Foam
  • Polyurethane Foam
  • PVC
  • Sign Board
  • Sign Foam
  • Titanium
  • Tooling Board
  • Wood
Benefits of Zirconium Nitride (Zrn) Coating
  • Creates a harder and tougher cutting edge, allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting
  • Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter (where the machine or work piece vibrates) under high chip loads (when used with low TIR spindles).
  • High flute volume supports high feed rates and chip loads
  • High aspect ratio for single pass deep-reach cutting
  • Flute geometry optimized for cutting sign foam, sign boards, hardwoods, thermoplastics and phenolic composites.
Milling Plastics
In a milling application, all plastics tend to behave differently so attention must be paid first and foremost to heat input as that greatly impacts surface finish and chip control. Some of Amana Tool carving tools, as you can appreciate, have a very small diameter, therefore any material chip-loads need to reflect that small size. It can however withstand RPM’s up to 60,000 RPMs. A directed air-blast to keep chips away along with cooling the tool and work piece are always welcome.

Suggested starting spindle speed might be 18,000 RPM, there needs to be some experimenting on the part of the programmer to best find an acceptable finish.

Tool No. 46286
(D) Diameter 1/8"
(R) Radius 1/16"
(a°) Angle 3.6°
(B) Cutting Height 1"
(d) Shank 1/4"
(L) Overall Length 3"
Type Ball Nose
Flutes 3

Comment on Facebook

Product Reviews

Login or Register to write the first review.