Pages Menu
Categories Menu

Posted by on Oct 25, 2013 in Tool Repair Problems | 8 comments

Nail Gun Maintenance

Over 50% of the nail gun problems we see come in for repair are caused by improper lubrication.

Many guns made by Senco as well as some of the new Porter-Cable guns and some others have special orings and are designed not to be oiled. But if you do oil them it damages the o rings.
But not oiling a gun that takes oil is just as bad. Always use a name brand oil if your gun requires oil. We use the Senco PC0101 oil in all the guns we repair that take oil.

Never use WD-40 or motor oil in your guns. These will make the orings swell so that the gun does not work correctly.

For the track lubrication we use a pure silicone lubricant to keep the feed spring and safety working smoothly.
When you use WD-40 on the track the oil in the WD-40 just attracts dirt and sawdust. Not a good thing.
#nailgun

8 Comments

  1. I need the address plz i have 2 framing guns i need to fixed

    • Flavio
      Our address is
      2510 Ella Blvd
      Houston, Tx
      77008
      inside the 610 North Loop

  2. Bill – can you repair a Duo-fast coiling nail gun that is about 9 yrs old? I need it this week.

    Thanks

    • Sorry but we do no work on DuoFast guns. In Houston you can get them repaired at Southern Fastening Address: 7425 Pinemont Dr, Houston, TX 77040
      Phone:(713) 688-3781

  3. my Hitachi coil nailer sometimes it skips a nails

    • Daniel,
      this can be a few things but check the alignment of your nails first, it could also be the feed pawl or something as easy as the driver o ring.
      Circle Saw

  4. Do you sell parts for Porter Cable FR350A?

    • Yes we Do, as well as the entire Porter-Cable Nail Gun Line.

Leave a Reply to Bill Cancel reply

Your email address will not be published. Required fields are marked *

4 × 4 =