Item:13-926, VARIABLE SPEED MOTOR 10-324,325,326

Rikon Model 13-926 DVR Smart Motor
Upgrade your RIKON 14″ Bandsaw with the Striatech DVR Smart Motor

• Infinitely Variable – Cut at Any Speed
• Easy-to-Use – One-Touch Speed Selection
• Continuous Torque – For a Beautiful Finish
• Energy Efficient – Limited Vibration and Heat
• Effortless Cutting – Through Any Material
• Available for models 10-324, 10-325, and 10-326

RIKON & Striatech have combined their expertise to develop the world’s first DVR Smart Bandsaw. It’s been almost 200 years since the bandsaw
was first produced. In that time, the technology has barely changed… until now.

By adding Striatech’s smart switched reluctance motor, RIKON’s 14” bandsaw series is better than ever before. Unlike previous bandsaw motors, the Striatech motor is infinitely variable, and offers continuous torque. This means a beautiful finish on your workpiece, and a much easier
user experience.

Improved energy efficiency and quiet, vibration-free operation are added bonuses to this already amazing saw line up. With
an easy-to-read screen, DVR controller, and electronic braking, this technology adds much-needed features to the bandsaw.

DVR Motor
Horsepower 1.75HP Single Phase
Amps 15 Amps
Volts 110V or 220V
Blade Speed (Variable) 100 RPM (45 SFPM) to 2,375 RPM (4400 SFPM)
4-Wood Preset Functions
1. Resaw preset speed 4,000 SFPM (2,160 RPM) / Variable from 2,000 SFPM to 4,400 SFPM (1080 to 2,375 RPM)
2. Bowl Blank preset speed 3,000 SFPM (1,620 RPM) / Variable from 1,500 SFPM to 3,600 SFPM (810 to 1,945 RPM)
3. Rip/ Cross Cut preset speed 2,500 SFPM (1,350 RPM) / Variable from 1,250 SFPM to 3,600 SFPM (675 to 1,620 RPM)
4. Scroll/ Pattern speed 2,000 SFPM (1,080 RPM) / Variable from 1,000 SFPM to 2,400 SFPM (540 to 1,295 RPM)
4-Metal Preset Functions

1. Carbon Steel preset speed 250 SFPM (135 RPM) / Variable from 175 SFPM to 350 SFPM (195 to 395 RPM)
2. Stainless Steel preset speed 100 SFPM (110 RPM) / Variable from 70 SFPM to 150 SFPM (100* to 170 RPM)
3. Titanium preset speed 75 SFPM (100* RPM) / Variable from 65 SFPM to 85 SFPM (100* to 100* RPM)
4. Cast Iron preset speed 160 SFPM (180 RPM) / Variable from 95 SFPM to 225 SFPM (105 to 255 RPM)
*Must change belt to slow pulley range

4-Non-Ferrous Metal Preset Functions
1. Aluminum preset speed 400 SFPM (445 RPM) / Variable from 300 SFPM to 440 SFPM (340 to 500 RPM)
2. Brass preset speed 250 SFPM (280 RPM) / Variable from 150 SFPM to 315 SFPM (170 to 355 RPM)
3. Bronze preset speed 220 SFPM (250 RPM) / Variable from 80 SFPM to 260 SFPM (100 to 295 RPM)
4. Copper preset speed 200 SFPM (225 RPM) / Variable from 160 SFPM to 220 SFPM (180 to 250 RPM)

3-Plastic Preset Functions
1. Acrylic speed 2500 SFPM (2,845 RPM) / Variable from 1,500 SFPM to 4,000 SFPM (1,705 to 3,500 RPM)
2. Nylon speed 1500 SFPM (1,705 RPM) / Variable from 900 SFPM to 2,100 SFPM (1,025 to 2,390 RPM)
3. HDPE speed 2000 SFPM (2,275 RPM) / Variable from 1,800 SFPM to 3,000 SFPM (2,050 to 3,415 RPM)

1-Custom Preset Function
1. Custom Preset Speed 2,000 SFPM (2,275 RPM) / Variable from 45 SFPM allowed up to 4000 SFPM (100 to 3,500 RPM)

Warranty
2 Years