Item:1794224K, 24" LATHE 42" C-C 3HP

Powermatic 1794224K 4224B Lathe with Lamp Kit

• Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustments
• Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced features
• Vacuum system provides quick method of chucking bowl blanks
• 15-amp quad receptacle for easy reach of powered accessories
• Two 100W task lamps provide ideal lighting
• Air nozzle with quick connect for clearing dust/chips
• Set of dead centers which hold a spindle for visual comparison
• Laser etched quill is self ejecting.
• Two position mount for the optional bed extension
• Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers

• Height: 31.5
• Length: 68
• Weight: 960
• Volume: 33.469
• Width: 27
• Rabbeting Capacity (In.): 3
• Table Size (L x W) (In.): 40-3500
• Helical Knife Size (L x W x T) (In.): 1-1/4 x 8 TPI
• Rabbeting Ledge (In.): 44
• Dust Port Outside Diameter (In.): 5/8
• Motor Power (HP): Full Length of Bed
• Cutterhead Speed (RPM): VFD will accept 1 or 3 phase power
• Fence Positive Stops (Deg.): 230 only
• Cutterhead Diameter (In.): MT-2
• Outfeed Table Length (In.): 98
• Motor Voltage (V.): 21
• Dust Collection Minimum CFM Required (CFM): 3
• Cutting Capacity (W x D) (In.): 88
• Prewired Voltage (V.): 42
• Motor Phase: 10
• Number of Knives: High 135-3500/Med 80-2000/Low 40-970
• Cuts Per Minute: 4-1/2
• Wiring Remarks: Cast Iron
• Recommended Circuit Size (Amps.): 30
• Motor Current (Amps): MT-2
• Size (In.): Leg Stand
• Standard Knife Size (L x W x T) (In.): 3/8
• Type of Cutterhead: M35 x 1.5 UNF
• Fence Size (L x H) (In.): 24
• Table Height from Floor (In.): 230 only
• Infeed Table Length (In.): 2-1/2