Delta Model SA180 1" Belt/8" Disc Sander
Package contains 1/3 HP, 1725 RPM, 120V induction motor and controls; miter gauge; 1" x 42" 100 grit belt; and 8" diameter 60 grit disc.
Features
• 3000 SFPM belt speed is ideal for metal grinding, deburring and sharpening, as well as sanding and buffing jobs.
• 8" diameter disc operates at 1725 RPM for finishing hard and soft woods, plastics, composites and more.
• Tilting cast-iron tables on belt and disc units are slotted for miter gauge use.
• Factory-set belt tensioning and one-knob belt tracking for accurate operation.
• Built-in, 1-1/2" ID dust spout for adaptation to a dust collection system or shop vacuum.
• The narrow belt width is ideal for sanding odd-shaped pieces. Steel platen is removable to facilitate working with curved pieces.
• Belt cover is removable for access to the idler wheel when performing contour sanding operations.
• Compound angles can be achieved on both units by tilting the table and utilizing the standard-equipment miter gauge. Miter gauge turns and locks for common angles 45º left and right.
Specifications
Motor
• 1/3 HP, 120V, 1725 RPM Induction
Motor Control
• Toggle switch with removable lock out key
Speed
• Belt: 3000 SFPM (914 SMPM)
• Disc: 1725 RPM
Abrasive Belt
• Length: 42" (1067 mm)
• Width: 1" (25 mm)
Disc Diameter:
• 8" (203 mm)
Table Size and Tilt
• Belt: 6-1/8" x 7-1/8" (156 x 181 mm) - Tilts 45º out
• Disc: 4" x 10" (102 x 254 mm) - Tilts 45º in and out
Dust Collector Outlets
• 1-1/2" (38 mm) Diameter
Overall Dimensions
• Height: 19-1/2" (4950 mm)
• Depth: 25-1/4" (641 mm)
• Width: 15" (381 mm)
Weight
• 62 lbs. (28 kg) |
