|
Amana LB10801 Non-Melt
Blade
-2º Hook - Modified Triple Chip (MTC) Grind
When cutting acrylics such as Plexiglas®, polycarbonates such as Lexan® and other plastics, "chip-welding" - a melting of the material - is a concern. But not with the Non-Melt blade. With a modified triple-chip grind and a 2º negative hook angle, the blade produces less heat than a standard blade, leaving a crisp, smooth edge.
|
D - Diameter |
10" (250mm) |
|
Teeth |
80 |
|
Grind |
MTC |
|
Tool No. |
LB10801 |
|
B - Kerf |
.100" |
|
C - Plate |
.070" |
|
Bore |
5/8" |
|
|