Festool Model TS 75 EQ
Plunge-Cut Saw
Power and Precision in the Palm of Your Hand
Experience the incredible power of the TS 75 plunge-cut saw. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will wonder why you struggled so long doing it the hard way.
FEATURES
• Guide Rail Guidance - When used with included Festool guide rails, you have ultimate control over the TS saw for perfectly straight cuts. Add the replaceable splinterguard, and a splinter-free cut is achievable on both sides of the blade.
• Scribe Line=Cut - Set the guide rail to your marks and know that you will cut right on the line, regardless of the angle.
• Plunge-Cutting Action - Simple depth adjustment allows you to expose only the part of the blade necessary for the cut. The plunge action allows cut placement anywhere on the cut line for straight cuts or cut-outs into material.
• Riving Knife - Spring-loaded riving knife (splitter) retracts into the housing during plunge cuts. The riving knife keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback, leaving you in control of the operation.
• MMC Electronics - Variable speed allows you to match the speed of the saw to the material. The electronics also maintain a consistent speed under load, improving cut performance and protecting the saw's motor from thermal and current overload.
• Power - The TS 75 is Festool's most powerful plunge-cut saw, providing enough power to slice through the toughest of materials with little concern for swirl or burn marks.
• FastFix Saw Blade Changing System - Blade changes are easier and faster using the FastFix system. When engaged, the power switch and arbor are locked simultaneously.
• Depth of Cut - At 2-3/4" depth of cut, the TS 75 can power through thick stock with ease.
• Slip Clutch - The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
INCLUDES
• 36-Tooth High-Quality Carbide Blade
• 75" Guide Rail
• Slipclutch
• Splinterguard
• Limit Stop
• Plug-It Power Cord
• SYS 5 Systainer
SPECIFICATIONS
|
Model No. |
TS 75 EQ |
|
Item No. |
561 188 |
|
Power Consumption |
1600 Watts/13 Amps/120 V AC |
|
Saw Blade Speed |
1,350-3,550 RPM |
|
Saw Blade Diameter |
8-1/4" |
|
Bevel Cuts |
0° - 45° |
|
Cutting Depth on Guide Rail |
2-3/4" Straight Down
2-1/8" at 45° |
|
Cutting Depth Without Guide Rail |
2-15/16" Straight Down |
|
Arbor Size |
30mm |
|
Weight |
13.6 lbs. |
|
