|
Amana 54117 Traditional Raised Panel Bit, 2 Flute with Ball Bearing Guide
Raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. Bit has a 1/2" shank. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use this bit for panels with curved edges. Multiple passes recommended.
|
D - Cutting Diameter |
3-3/8" |
|
*'A' - Reveal |
1-7/16" |
|
aº - Bevel Angle |
15º |
|
Tool No. |
54117 |
|
B - Cutting Length |
1/2" |
|
B1 - Cutting Length |
5/16" |
|
d - Shank Diameter |
1/2" |
|
L - Overall Length |
2-3/8" |
|
Type |
Traditional |
Use in a table-mounted router.
Not for use in a handheld router!
Replacement bearing #47706
Warning: Maximum RPM 14,000
NOTE: Reveal (*'A') reflects total length of cut. Therefore, you must deduct 3/8" (usually) for allowing the panel to recess into the frame.
|
|
