|
Amana 49556 Ogee-and-Bead Bit with Ball Bearing Guide, 2 Flute
Cuts a whallow ogee into the tabletop surface coupled with a bead at the edge. Bit will produce a fillet if set to cut deep enough. With the optional 3/8" bearing, it will produce a fillet at the cut's edge. Good choice for handrails.
|
D - Cutting Diameter |
2-1/2" |
|
R - Radius |
3/8" |
|
R1 - Radius |
1/4" |
|
Tool No. |
49556 |
|
B - Cutting Length |
3/4" |
|
d - Shank Diameter |
1/2" |
|
L - Overall Length |
2-3/4" |
Standard 1/2" bearing #47706 (included)
Optional 3/8" bearing #47702 (order separately)
Warning: Maximum RPM 16,0000
Use in a table-mounted router.
Not for use in a handheld router!
|
