Amana 49120 Cove Bit with Ball Bearing Guide, 2 Flute
The covetto form - produced by the cove bit - is one of the classic building blocks for many molding profiles. Use it alone or in combination with beads and fillets. Use the cove as well to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables. The other half is the corner-round. Use in handheld or table-mounted routers. Large-diameter tools must be run at reduced speed. For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce the amount of stock to be removed in the finish pass. This will produce a smoother finish, and it will prolong tool life
.
|
D - Cutting Diameter |
2" |
|
R - Radius |
3/4" |
|
Tool No. |
49120 |
|
B - Cutting Length |
1" |
|
d - Shank Diameter |
1/2" |
|
L - Overall Length |
2-7/8" |
Replacement bearing #47706
Warning: Maximum RPM 12,000
|
|
