|
Delta Model 23-710 Sharpening Center
Package contains 1/2 HP, 120V motor; 5" diameter, 120-grit aluminum oxide dry wheel; 8" diameter, 1000-grit wet wheel; tool rest base; sliding tool holder; water tank; tool rest; eye shield; and wrenches.
Features
Powerful 1/5 HP, 120V induction motor for a variety of sharpening jobs.
Cast-iron construction minimizes operating vibration for increased accuracy.
Tool rest base supports the sliding tool holder for steadier, safer sharpening; adjusts for height and tool angle, and may be mounted to either the wet or dry wheel.
Dry wheel tool rest adjusts to compensate for wheel wear; protective eye shield deflects sparks.
Water tank has adjustment knob for regulating water flow.
Wet wheel has front and rear splash guards for retaining water spray during operation.
Base holes for mounting machine to work bench.
On/off rocker switch has clear plastic, water-resistant cover.
Balanced 8" diameter, 1000-grit wet wheel for fine grinding; 5" diamter dry wheel grinds nicked, scratched and pitted tools without damaging temper.
Standard-equipped sliding tool holder secures lathe turning tools, carving chisels and plane irons; may be used on wet or dry wheel.
Specifications
Motor
1/5 HP, 120V, 1 Phase, 60 Hz.
Motor Control
On/off rocker switch
Wheels
Diameters: 5" (127 mm), 8" (203 mm)
Type: Aluminum Oxide Dry, Wet
Face: 2" (51 mm), 2-1/2" (64 mm)
Hole: 1/2" (0.70")
Speeds: 3450 RPM, 400 RPM
Wet: 1,000 Grit; Dry: 120 Grit
Overall Dimensions
Width: 16" (406 mm)
Depth: 21" (533 mm)
Height: 13" (330 mm)
Weight
42.5 lbs. (19 kg) |
|
