Delta Model 14-651 1/2 HP Mortiser
Package contains 1/2 HP, 120 Volt, 60 Hz., single phase induction motor; 3/8" capacity chuck and key; four mortising chisels and bits; tool and chisel holder; and riser block.
Features
• Easy and open access to drill chuck for bit changing.
• Large cast-iron base with center through hole.
• Adjustable rack and pinion fence and rack and pinion head raising and lowering.
• Mortising head column can be turned 180º and remounted for off-table mortising.
• Adjustable fence and hold down.
• Adjustable dovetail way on mortising head.
• Tool and chisel tray.
• Gas-filled head stabilizer.
• Height attachment adds 1-3/4" of capacity under head.
• Multi-position feed lever.
• Adjustable depth stop.
• Chuck key/hex wrench for bit and chisel changing.
Specifications
Motor
• 1/2 HP, 120V, 60 Hz., 1 Phase Induction Motor, 1750 RPM
Capacities
• Chuck: 3/8"
• Chisel Sizes: 1/4" x 1/4", 5/16" x 5/16", 3/8" x 3/8", 1/2" x 1/2" (5/8" max. dia. shank)
• Max. Stroke: 5" (127mm)
• Under Head to Base: 9-3/8" (238mm)
• Chisel Center to Fence: 3-3/4" (95mm)
• Under Hold Down: 3-3/4" (95mm)
Fence Size
• 2-15/16" x 5-13/16" (75 x 148mm) each side, 13-5/8" (346mm) overall
Base Size
• 16-1/4" x 13-1/2" including post mounting area (413 x 343mm)
Overall Dimensions
• Height: 30" (762mm)
• Width: 13-1/2" (343mm)
• Depth: 16-1/4" (413mm)
Weight
• 55 lbs. (25kg) |
|
