Item:444, DEPTH/ ANGLE GAGE

General Tools 444 Metal Depth/Angle Gauge

The easy-to-use Depth and Angle Gage allows you to accurately measure and mark the outside, inside and sloped angles of a surface. The hardened steel base is grooved on both sides to deliver accurate setting of the ruler at 30, 45 and 6" degree angles. The rule can also be used as a depth gage for measuring small holes and slots.

• Our easy to read gage makes precise depthmeasurements in small holes and slots; alsodoubles as a protractor.
  
• Spring tension nut eases depth and anglemeasuring by securing rule in milled slotat 90° angle to base.
  
• Permits easy setting of protractorangle to 30°, 45° and 60° settingson both sides.
  
• 6" x 1/4" etched stainless steel rulegrad uated in 32nds and 64ths.
  
• 2-1/2" wide hardened steel base.
  

• Package
  
• Dimensions: H: 8.62" W: 2.75" D: 0.62"
  
• Cube: 0.0085
  
• Weight: 1.1oz Weight: 0.06lbs
  
• Shelf Pack
  
• Dimensions: H: 9.75" W: 2.87" D: 0.62"
  
• Cube: 0.0101
  
• Weight: 3.4oz Weight: 0.21lbs
  
• Master Pack
  
• Dimensions: H: 22.5" W: 16.25" D: 11.75"
  
• Cube: 2.4861
  
• Weight: 433oz Weight: 27.06lbs
  
• Metric Package
  
• Dimensions: H: 0.218948mm W: 0.06985mm D: 0.015748mm
  
• Cube: 0.0002159
  
• Weight: 31.1844754375gr Weight: 0.498951607Kg
  
• Shelf Pack
  
• Dimensions: H: 0.24765mm W: 0.072898mm D: 0.015748mm
  
• Cube: 0.00025654
  
• Weight: 96.388378625gr Weight: 0.096388378625Kg
  
• Master Pack
  
• Dimensions: H: 0.5715mm W: 0.41275mm D: 0.29845mm
  
• Cube: 0.06314694
  
• Weight: 12275.343513125gr Weight: 12.275343513125Kg